End to End Connector for Under Cabinet Light 31138

Product Description

The 31138 End to End Connector connects two compatible undercabinet light fixtures directly in a straight line, making it easy to extend a continuous lighting run without additional connecting wires. Its plug-and-play design requires no soldering or special tools, helping simplify installation while keeping the connection compact and clean.

Designed for compatible 31138 undercabinet lighting, this connector is ideal for cabinets, shelves, display cases, and other linear lighting applications where two light fixtures need to be joined end to end.

Key Features

• Direct Fixture-to-Fixture Connection – Connects two compatible lights in a straight line without an additional connecting wire.
• No Soldering Required – Plug-in connection eliminates soldering during installation.
• Tool-Free Installation – No crimping tools, screwdrivers, or other special tools are required.
• Compact Design – Creates a clean connection between adjacent light fixtures.
• Polarity Connection – Designed for positive (+) and negative (–) connections; correct polarity must be maintained during installation.

Product Specifications

How to Install the 31138 End to End Connector

Step 1 - Disconnect the Power:
Turn off and disconnect the power supply to the undercabinet lighting system before installation.

Step 2 - Position the Lights:
Place the two compatible light fixtures end to end and align the connection points.

Step 3 - Check the Polarity:
Confirm the positive (+) and negative (–) polarity before making the connection. Do not reverse the polarity.

Step 4 - Connect the First Light:
Insert one end of the 31138 End-to-End Connector into the compatible connection point on the first light fixture.

Step 5 - Connect the Second Light:
Insert the other end of the connector into the second light fixture, making sure the polarity remains correctly aligned.

Step 6 - Secure the Connection:
Make sure both light fixtures are fully connected and the connector is securely seated.

Step 7 - Power On and Test:
Restore power and test the connected lights to confirm that they are operating properly.

FAQ

What is the 31138 End to End Connector used for?
No. The 31138 End to End Connector is used to join two compatible undercabinet light fixtures directly end to end. It allows the lighting system to continue in a straight line without using an additional connecting wire.

Does the 31138 undercabinet light connector require soldering?
No. The 31138 connector uses a plug-in design, so no soldering or special tools are required. This makes it easier to connect compatible undercabinet lights during installation.

Do I need a wire between two lights when using this connector?
No. This end-to-end LED light connector plugs directly between two compatible fixtures, allowing them to be connected without a separate extension wire. It is intended for applications where the lights are installed directly next to each other in a straight run.

Can the 31138 End to End Connector be used for corners?
No. This connector is designed for straight end-to-end connections. For installations that need to turn a corner, use the compatible 31138 L-Shape Connector instead.